Twenty20 Helmet Camera Kit - Catch the action baby!!! 

BMX, Downhill, Motocross, Snow, ATV, you name it. If you've got a two wheeled vehicle that doesn't have a battery then the Twenty20 Helmet Camera is right for you. Coming in at a total weight of 10oz (with a battery). Twenty20 offers the smallest and lightest Helmet Cam on the market.

Why Twenty20? Our systems are the only helmet cameras to use a CMOS chip set so everything is run off a single 9 volt battery. A single 9 volt battery will last up to 20 hours. Our products also include a 1 year warranty.

The camera mounts on your helmet with a marine grade velcro and also includes a microphone and mini-jack connector to plug into any recording device with an A/V input. Now you can show all your friends your POV view of your adventures.

Twenty20 Camera

The camera used with the Twenty20 Helmet Camera features a small overall form factor, fitted with the next generation of CMOS camera technology. This technology substantially reduces power consumption and required voltage, thus significantly extending battery life to 20 hours on a single 9-volt battery. Additionally, the CMOS assembly process yields a camera that has greater vibration resistance as well as longevity, when compared to the aging CCD technology used by most other cameras.

The unique housing for the Twenty20 camera uses aluminum material to ensure the camera chip stays dry and protected from the most extreme conditions. The wiring is supported with a strain relief so don't worry about pulling the wiring out of the back. Twenty20 is proud to make a user friendly, but extremely durable Helmet Camera.

Image Sensor: 1/3rd. inch CMOS
Resolution: 400 scan lines
Dimensions: (L) 2 ½" x (D) 1"
Fps: 30
Operating temp: -14°F - 122°F

Twenty20 Battery

The Twenty20 battery pack boasts the smallest and lightest battery pack you will ever find with a Helmet Camera. Our battery pack powers the entire system with just one 9V battery and one connection. Using our simple "Y" cable design, there are no extra wires and no chance of misconnecting your camera. Our battery tests showed that most "off the shelf" batteries lasted between 16-20 hours. That's five times the life of a CCD camera powered by the typical 8 AA batteries. What's more, Duracell has just released a Lithium Ion 9V battery for smoke detectors that's purported to last ten times longer that a standard 9V.

Are you tired of using 8AAs to power your helmet camera? Well now's your chance to eliminate all of those extra batteries, cutting the weight and battery expense of your helmet camera experience.

Twenty20 Record Cable

The Twenty20 Helmet Camera includes a 12-inch record cable with a standard 3.5mm mini-jack plug on the end. The video signal travels down the record cable and plug into the A/V input on any recording device. This 3.5 mini-jack plug can be easily adapted to fit RCA inputs, as well as most other proprietary connections.

To ensure your recording device has an A/V (Audio/Video) input please visit the Twenty20 Camcorder Compatibility List to view information on all the camcorders on the market. Beware that some Sony camcorders do require a connector (also listed on our camcorder list) to make a helmet camera compatible.

Twenty20 Microphone

The Twenty20 Helmet Camera includes an external microphone to be clipped to the top of your jersey for all your colour commentating or used to capture the sound of your machine.

The Twenty20 microphone features a high-gain input, as well as noise cancellation. It is always recommended to locate the microphone where direct wind won't interfere with the sounds of your ride.