Item code : 211003


RFX Universal On/Off Kill MX Switch


One Size Despatched in 1-2 days Product Sizing Chart
Product Sizing Chart

In stock


Item code: 211003

RFX Race Series kill buttons are an exact OEM replacement part. Complete with the same couplings, fasteners, connectors and exact cable lengths as the genuine part. Available for a wide variety of bikes. Features:

  • OEM replacement
  • Accepts all original connectors
  • OEM cable length

Fitting Instructions:

  • Start by removing the front number plate
  • Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down
  • Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank
  • Unclip the connector and remove the switch taking a note of the routing for the wiring
  • Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner
  • Loosely attach the new switch on to the handlebars in the desired position
  • Route the wires as per the old switch and clip the connector together
  • Check all free pay in the wires by turning the bars to full extension and making sure the wires don't pull tight, adjust if necessary
  • Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost
  • Re-fit your number plate

Manufacturers Description

Manufacturers Description
One Size